Twin Cylinder Concrete Crusher D Series Crusher

Ultimate Weight-saving and Top-class Opening Range

A simple design structure without sync links has reduced maintenance costs.
The special steel cutting blade, which is equipped as standard and can be used on four sides, can cut rebar that appears when crushing concrete.
This demonstrates its power in primary crushing such as building demolition and foundation demolition.

Successfully reduced weight in the industry.
Four rotation types to choose from.

Extremely light! A simple design structure without sync links has achieved weight reduction and reduced maintenance costs. Despite its light weight, Taguchi's specially selected strengthened machined jaw and twin cylinders enable powerful crushing.
Four types of rotation can be chosen: F type (free rotation), S type (hydraulic rotation), A type (automatic rotation), and AS type with a new type of rotation.

Top-class opening range
by using in-house manufacturing cylinders,No.1 in the industry.

Our in-house cylinders have achieved wide jaw opening, while maintaining their crushing force.　D-212F/S/A and D-352F/S/A boast the industry's largest jaw opening of 1,300 mm and 1,550 mm, respectively! The speed valve block comes equipped as standard (excluding some models).

A first in the industry! Attachable to any excavator! Introducing the new hybrid AS type.

Introducing the new AS type, the industry's first rotation type. This hybrid model combines the conventional A type and S type. Easily set with the switching valve, you can select "A mode = automatic rotation" for the excavator with two-line piping and "S mode = full rotation" for the excavator with five-line piping.

SPEC

Model name	Rotation type	Class of excavator[ton]	Operating pressure[MPa]	Max. operating pressure[MPa]	Length A[mm]	Max. jaw opening B[mm]	Cutting blade length C[mm]	Crushing force at tip D[kN]	Crushing force at center E[kN]	Mass[kg]	Equipped with the speed valve block
D-36	F	3 - 4	24.5	24.5	1010	360	100	240	358	240	No
	S
	A
	AS
D-42	F	4 - 5	24.5	24.5	1240	500	110	344	524	380	Yes
	S									390
	A
	AS										No
D-72	F	6 - 8	24.5	27.4	1710	730	130	371	579	740	Yes
	S									750
	A									760
	AS									770
D-75	F	6 - 8	24.5	27.4	1750	800	130	519	806	880	Yes
	S									890
	A									900
	AS									910
D-122	F	12 - 14	29.4	31.4	1870	900	130	532	834	1080	Yes
	S									1100
	A									1110
	AS									1120
D-135	F	12 - 14	31.4	34.3	2040	1000	190	731	1100	1420	Yes
	S									1440
	A									1440
	AS									1450
D-202	F	20 - 22	31.4	34.3	2260	1200	210	1030	1520	2170	Yes
	S									2210
	A									2200
	AS									2220
D-212	F	20 - 22	31.4	34.3	2370	1300	210	1160	1730	2330	Yes
	S									2350
	A									2350
	AS									2370
D-352	F	30 - 37	31.4	34.3	2700	1550	240	1400	2200	3620	Yes
	S									3630
	A									3630
	AS									3670
D-412	F	40 - 45	31.4	34.3	2990	1800	240	1360	2020	4790	Yes
	S
	A
D-452	F	40 - 45	31.4	34.3	3190	1900	240	1380	2110	5090	Yes
	S
	A
D-482	F	45 - 55	31.4	34.3	3310	2000	240	2250	3370	6070	Yes
	S
	A
D-492	F	45 - 55	31.4	34.3	3410	2200	240	2060	3150	6380	Yes
	S
	A
D-1052	S	100	31.4	34.3	3260	1900	240	1380	2110	5610	Yes
D-1052	A	100	31.4	34.3	3260	1900	240	1380	2110	5610	Yes
D-1082	S	100	31.4	34.3	3370	2000	240	2250	3370	6670	Yes
D-1082	A	100	31.4	34.3	3370	2000	240	2250	3370	6670	Yes
D-1092	S	100	31.4	34.3	3460	2200	240	2060	3150	6880	Yes
D-1092	A	100	31.4	34.3	3460	2200	240	2060	3150	6880	Yes

･ Single two-way hydraulic piping is required for F type.
･ Double two-way hydraulic piping is required for S type (including AS type in S mode). (However, for models other than D-36 and D-42, drain piping is required when the back pressure of the rotation line exceeds 2 MPa.)
･ Single two-way hydraulic piping is required for A type (including AS type in A mode). (Rotation may not be possible when the operating pressure is low.)
･ D-1052, D-1082, and D-1092 are not compatible with the adapter type.
･ We recommend reinforcing the stick of a hydraulic excavator that has this product installed.
･ The attachment cannot be installed on a hydraulic excavator of a different class.
･ For models compatible with D-36, contact your Taguchi dealer.