Twin Cylinder Rebar / Steel Frame Cutter DX Cutter

Ultimate Cutting Force, Weight-saving and Top-class Opening Range

With its twin cylinders, the DX cutter exerts an amazing cutting force to cut and crush concrete structures including steel frames and rebar.
Taguchi's representative cutter series demonstrates its excellent cutting ability on any demolition site.

Powerful cutting with a special steel blade

The specially shaped cutting blade bites sharply into an object to be cut and can perform delicate work such as drilling holes in steel frames. Two sides can be used on the tip side of the cutting blade, and four sides can be used on the bottom side of the cutting blade. A special steel material is used exclusively for cutters, and it cuts both thin and thick materials, including steel frames, rebar, and cables.

The strongest cutter with ultimate cutting force
and top-class opening range

Its greatest features are the wide jaw opening and the overwhelming cutting force provided by the original twin cylinders. While it is equipped as standard with a side cover for the main frame, cylinder rod cover, and speed valve block (on the jaw closing side) to prevent foreign objects from entering, it has achieved weight reduction. Two types of rotation are available: S type (hydraulic rotation) and A type (automatic rotation). A new model with a new type of rotation, AS type, is also available!

A first in the industry! Attachable to any excavator! Introducing the new hybrid AS type.

Introducing the new AS type, the industry's first rotation type. This hybrid model combines the conventional A type and S type. Easily set with the switching valve, you can select "A mode = automatic rotation" for the excavator with two-line piping and "S mode = full rotation" for the excavator with five-line piping.

The DXGG series, a new model which can grapple objects while cutting.

The DX Cutter series also includes the DXGG series with an original shape, which can pinch objects while cutting. The cut object can be pinched at the tip of the jaw. While maintaining the amazing cutting force of the DX cutter, the cutter is useful in an even wider variety of situations.

SPEC

Model name	Rotation type	Class of excavator[ton]	Max. Operating pressure[MPa]	Length A[mm]	Max. jaw opening B[mm]	Min. jaw opening C[mm]	Cutting blade length(bottom side + tip side) D[mm]	Tip cutting force E[kN]	Center cutting force F[kN]	Mass[kg]	Equipped with the speed valve block
DX-36	S	3 - 4	24.5	1010	250	-85	165+103	247	365	270	No
	A
	AS
DX-42N	S	4 - 5	24.5	1300	375	-110	205+155	323	500	430	Yes
	A									430
	AS									440
DX-72	S	6 - 8	27.4	1570	505	-120	260+175	431	627	810	Yes
	A									810
	AS									830
DX-135	S	12 - 14	31.4	1910	700	-145	325+210	759	1100	1530	Yes
	A									1530
	AS									1540
DX-202	S	20 - 22	31.4	2230	835	-190	400+260	1000	1470	2460	Yes
	A									2470
	AS									2490
DX-302	S	30 - 37	31.4	2560	1010	-210	450+310	1260	1880	3780	Yes
	A									3810
	AS									3810
DX-352	S	30 - 37	31.4	2640	1100	-250	500+345	1400	2080	4270	Yes
	A									4270
	AS									4300
DX-402	S	40 - 45	31.4	2700	1100	-250	500+345	1400	2080	4500	Yes
DX-402	A	40 - 45	31.4	2700	1100	-250	500+345	1400	2080	4500	Yes

･ Double two-way hydraulic piping is required for S type (including AS type in S mode). (However, for models other than DX-36 and DX-42, drain piping is required when the back pressure of the rotation line exceeds 2 MPa.)
･ Single two-way hydraulic piping is required for A type (including AS type in A mode). (Rotation may not be possible when the operating pressure is low.)
･ We recommend reinforcing the stick of a hydraulic excavator that has this product installed.
･ The attachment cannot be installed on a hydraulic excavator of a different class.