Wood/Plastic Scrap Shear GSE Shear eco
For Various Waste Plastic Cutting Work, also Fishing Net and Blue Tarp
GSE Shear eco can cut tarpaulins and fishing nets! This plastic scrap shear enables smooth cutting work with the wide jaw opening and sharp cutting blade.
In addition to the hydraulic rotation type (S), the automatic rotation type (A), and the tilt type (L), the hydraulic/automatic type (AS), a new type of rotation, is also available.
Covered with a long blade to the tip
A special steel blade that cover to the tip of cutter cuts waste plastic, fishing net and blue tarp easily.The blade is replaceable and can be used on 2 sides reversible. It brings reduction of maintenance cost and also easy maintenance.
Easy Work with Speed valve,
Wide Opening Range and Long Blade
Speed valve is standard in all models and it bring improving work efficiency. Wide opening range and long blade enable easy work.
A first in the industry! Attachable to any excavator! Introducing the new hybrid AS type.
Introducing the new AS type, the industry's first rotation type. This hybrid model combines the conventional A type and S type. Easily set with the switching valve, you can select "A mode = automatic rotation" for the excavator with two-line piping and "S mode = full rotation" for the excavator with five-line piping.
SPEC
GSE S/A Type
| Model name | Rotation type | Class of excavator[ton] | Max. operating pressure[MPa] | Length A[mm] | Max. jaw opening B[mm] | Cutting blade length C[mm] | Crushing force at tip D[kN] | Center cutting force E[kN] | Mass[kg] |
|---|---|---|---|---|---|---|---|---|---|
 GSE-62 | S | 6 - 8 | 27.4 | 1760 | 500 | 382 | 195 | 399 | 640 |
| AS | 660 | ||||||||
 GSE-122 | S | 12 - 14 | 31.4 | 2120 | 610 | 478 | 323 | 665 | 1190 |
| AS | 1210 | ||||||||
 GSE-202 | S | 20 - 22 | 31.4 | 2530 | 750 | 554 | 460 | 925 | 1890 |
| AS | 1910 |
･ Double two-way hydraulic piping is required for S type (including AS type in S mode). (However, drain piping is required when the back pressure of the rotation line exceeds 2 MPa.)
･ Single two-way hydraulic piping is required for AS type in A mode. (Rotation may not be possible when the operating pressure is low.)
･ We recommend reinforcing the stick of a hydraulic excavator that has this product installed.
･ The attachment cannot be installed on a hydraulic excavator of a different class.
GSE L Type
| Model name | Rotation type | Class of excavator[ton] | Max. operating pressure[MPa] | Length A[mm] | Max. jaw opening B[mm] | Cutting blade length C[mm] | Crushing force at tip D[kN] | Center cutting force E[kN] | Mass[kg] |
|---|---|---|---|---|---|---|---|---|---|
 GSE-62 | L | 6 - 8 | 27.4 | 1390 | 500 | 382 | 195 | 399 | 530 |
 GSE-122 | L | 12 - 14 | 31.4 | 1740 | 610 | 478 | 323 | 665 | 990 |
 GSE-202 | L | 20 - 22 | 31.4 | 2100 | 750 | 554 | 460 | 925 | 1730 |
･ Single two-way hydraulic piping is required.
･ We recommend reinforcing the stick of a hydraulic excavator that has this product installed.
･ The attachment cannot be installed on a hydraulic excavator of a different class.
MOVIE
Product Demo | GSEShear eco | GSE-120S | Cutting Test
Product Features | Hydraulic Plastic Scrap Shear "GSE Shear eco"
