Ship/Vehicle/Scrap Shear GS Shear
Scrap can be picked up and cut! A made-in-Japan scrap shear ideal for dismantling ships and vehicles.
Scrap can be picked up and cut directly from the ground! An attachment-type scrap shear made in Japan. The hydraulic rotation type (S) and the hydraulic/automatic type (AS), a new type of rotation, are available.
Outstanding cutting performance unique to an all-blade shear!
Equipped with a special steel cutting blade.
The tip of the cutting blade is equipped with a rhombic special steel cutting blade that can be used on two sides (patented). On the fixed jaw side, special steel cutting blades with excellent toughness are arranged in a U-shape, and each cutting blade can be used on two or four sides. Experience the sharpness unique to an all-blade design equipped with Taguchi's specially selected cutting blades.
The speed valve block comes equipped as standard!
Stainless steel can be cut powerfully with extremely small clearance.
The speed valve block comes equipped as standard on the jaw closing side. The wide jaw opening and high power provided by Taguchi's large cylinders make it easy to cut steel frames and scrap. A special steel plate is placed on the tip of the fixed jaw to prevent wear. Scrap can be picked up and cut directly from the ground without worrying about wear on the attachment.
A first in the industry! Attachable to any excavator! Introducing the new hybrid AS type.
Introducing the new AS type, the industry's first rotation type. This hybrid model combines the conventional A type and S type. Easily set with the switching valve, you can select "A mode = automatic rotation" for the excavator with two-line piping and "S mode = full rotation" for the excavator with five-line piping.
SPEC
GS S/AS Type
| Model name | Rotation type | Class of excavator[ton] | Max. operating pressure[MPa] | Length A[mm] | Max. jaw opening B[mm] | Cutting blade length C[mm] | Crushing force at tip D[kN] | Center cutting force E[kN] | Mass[kg] |
|---|---|---|---|---|---|---|---|---|---|
 GS-202 | S | 20 - 22 | 31.4 | 2630 | 520 | 490 | 1210 | 2410 | 2470 |
| AS | 2500 | ||||||||
 GS-482 | S | 40 - 55 | 31.4 | 3480 | 710 | 655 | 2160 | 4250 | 6030 |
| AS | 6050 |
･ Double two-way hydraulic piping is required for S type (including AS type in S mode). (However, drain piping is required when the back pressure of the rotation line exceeds 2 MPa.)
･ Single two-way hydraulic piping is required for AS type in A mode. (Rotation may not be possible when the operating pressure is low.)
･ We recommend reinforcing the stick of a hydraulic excavator that has this product installed.
･ The attachment cannot be installed on a hydraulic excavator of a different class.
