Hydraulic Magnet Pulverizer MC Pulverizer with MAG-GON
No Electrical Wiring Required
New Generation Pulverizer with Lifting Magnet
Equipped with a hydraulic driven magnet "MAG-GON" (PAT) . It does not require electrical wiring.
You can collect rebar generated by pulverizing work efficiently.
No Customization and Additional Battery/Generator required
Whereas conventional types require modifications such as electrical wiring to excavator body side, MAG-GON does not require any customization.
MAG-GON can work immediately after installation, regardless of type of hydraulic excavator. No additional batteries or generators are required.
Big cylinders and Speed valve
MC Series with big cylinders and Speed valve realizes pulverizing work with low-vibration and low-noise.TAGUCHI's unique design to place hyd. cylinder inside the main body enable to work without worrying about damage to the rod.Speed valve (jaw closing) is standard in all models and it bring improving work efficiency.
Easy Maintenance
Special Steel Blade
The special steel blade as standard feature can be used on 4 sides reversible. It is possible to cut the rebar that appears during pulverizing work.
The tooth is also made of special steel and it is easy to replace and repair.
SPEC
| Model name | Class of excavator[ton] | Operating pressure[MPa] | Max. operating pressure[MPa] | Length A[mm] | Max. jaw opening B[mm] | Cutting blade length C[mm] | Crushing force at tip D[kN] | Crushing force at center E[kN] | Magnet use rating[%ED] | Magnet power consumption[kW] | Magnet diameter F[mm] | Mass[kg] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
 MC-36M2C | 3 - 5 | 24.5 | 24.5 | 955 | 430 | 70 | 178 | 282 | 50 (Repeating cycle of power on 5 minutes and pause 5 minutes) | 0.1 | φ200 | 290 |
 MC-75FM4A | 6 - 8 | 24.5 | 27.4 | 1350 | 620 | 100 | 369 | 534 | 60 (Repeating cycle of power on 6 minutes and pause 4 minutes) | 0.5 | φ400 | 780 |
 MC-75FM5A | 6 - 8 | 24.5 | 27.4 | 1390 | 620 | 100 | 369 | 534 | 60 (Repeating cycle of power on 6 minutes and pause 4 minutes) | 1.0 | φ500 | 940 |
 MC-135FM4A | 12 - 14 | 31.4 | 34.3 | 1570 | 750 | 120 | 547 | 882 | 60 (Repeating cycle of power on 6 minutes and pause 4 minutes) | 0.5 | φ400 | 1230 |
 MC-135FM5A | 12 - 14 | 31.4 | 34.3 | 1570 | 750 | 120 | 547 | 882 | 60 (Repeating cycle of power on 6 minutes and pause 4 minutes) | 1.0 | φ500 | 1400 |
MC-212FM5A | 20 - 22 | 31.4 | 34.3 | 1860 | 885 | 160 | 725 | 1170 | 60 (Repeating cycle of power on 6 minutes and pause 4 minutes) | 1.0 | φ500 | 2100 |
 MC-212FM7A | 20 - 22 | 31.4 | 34.3 | 1860 | 885 | 160 | 725 | 1170 | 60 (Repeating cycle of power on 6 minutes and pause 4 minutes) | 3.3 | φ700 | 2370 |
MC-352FM7A | 30 - 37 | 31.4 | 34.3 | 2320 | 1050 | 180 | 1060 | 1740 | 60 (Repeating cycle of power on 6 minutes and pause 4 minutes) | 3.3 | φ700 | 3570 |
･ Single two-way hydraulic piping is required.
･ MC-36M2C is powered by a 12V DC battery.
･ We recommend reinforcing the stick of a hydraulic excavator that has this product installed.
･ The attachment cannot be installed on a hydraulic excavator of a different class.
